the Chinese LED lighting market will gradually start

The researchers will adjust the red technology before moving on to other colors such as yellow and green, enabling LEDs to emit white light with no REEs.A spokesman from Lights 4 Living said: “This research is an important step in the development of LEDs, ensuring they become even more environmentally friendly and sustainable. REEs are very expensive, so finding a way to replace this component of an LED is an important step in making Led flood light become more popular in home lighting.”

With the emerging of Chinese civil LED lighting market, some enterprises focusing on the overseas markets also have transferred attention to the Chinese market. Recently, Li Li, the president of Shenzhen Jiawei Photovoltaic Lighting Co., LTD, said in an interview that Jiawei focusing on the North American market has started developing Chinese market from last year, and it will continue to make efforts to extend Chinese market to seek breakthrough, Jiawei considers the photovoltaic LED lighting as a breakthrough, and it plans to use E-Commerce and other new channel models for brand expansionLi Li introduced that over the past 10 years, 70% of the company's revenue comes from the North American market, but Chinese market is expected to keep pace with North American market in the future. "Focusing on Chinese market means that the products must be developed on the basis of Chinese consumers' demand, as the public have deeper understanding of LED lighting, the Chinese LED lighting market will gradually start." Li Li believes.


Xiaoxiong Liu, vice president of Jiawei, revealed that many LED companies are trying the E-Commerce channel; Jiawei's E-Commerce team also will be established this year, currently, the E-Commerce sales model of Led high bay light is still being explored.As a benchmark to the development of the lighting industry, Guangzhou International Lighting Exhibition was recently concluded. Taking an overview of the exhibition this year, it can be learned that the market demand for high-quality, cost-effective lighting products is urgent, many industry insiders believe that to develop upstream core technology will be an important factor for the popularity of LED lighting.

This device also supports LED lighting silicon substrates

Unlike traditional automatic high-beam setups, the Matrix array is so precise that it "blanks out light that would shine directly onto oncoming and preceding vehicles" while continuing to use full high-beam power on other sections of the road and shoulder not occupied by other vehicles. Further, the camera- and electronic brain-governed system can dim or extinguish LEDs as necessary to deal with traffic. The active system also differs from today's adaptive headlamps by not requiring servo motors to direct Led high bay light, yet they can still function as cornering headlamps – ones that can predict a road's trajectory because they are linked with the car's GPS system.Interestingly, the system also works with Audi's optional night vision system. When the latter detects a pedestrian in the dark, it automatically flashes a batch of LEDs to put both the driver and pedestrian on notice about each others' presence.

Rates of suicide in the Asian country have doubled over the past decade, according to the World Health Organization. Analysts believe that crumbling traditional values, living in a hyper-competitive market and future uncertainty have all contributed.The company, in conjunction with Samsung Life Insurance, says that suicide rates on the bridge have been reduced by 77 percent as a result.This product also applies the rotation system in order to maintain uniformed LED chip production, and it is precisely managed by a management system. 8-inch LED chips require a fine management system in order to avoid yield loss. Larger chips may require an even more careful management during the production process.


The epitaxy process requires a new management method to control the gas flow and deposition. This device also supports LED lighting silicon substrates. According to current investigations, the 4-inch and 6-inch products produced by the company’s system showed an increased efficiency and yield. The G5+ has therefore received the led lighting with the Highest Efficiency award.Not long ago, Tridonic announced that it is preparing to introduce a new line of LED drivers, and it will end the magnetics business supporting legacy light sources at the end of 2013.As the pace of the transition to Led flood light solid-state lighting (SSL) is hastening, many companies with a long lighting history are affected, Tridonic is no exception. To some extent, the decision that Tridonic refocuses on LED and intends to end its legacy business is in preparation of changes caused by the legislation to regulate low-efficiency magnetic products beginning in 2017 formulated by European Union (EU).

you can read more:http://winonds7.blogspot.com/2013/10/it-is-announced-that-its-board-of.html

The yaham High Bay Series is a highly efficient, most advanced lighting fixture designed to operate for over 150,000 hours without maintenance. In addition, the yaham High Bay fixtures installed at Lordstown are equipped with ALLink, the industry's first, fully-integrated and built-in wireless control system.

"ALLink provided Lordstown with an unprecedented opportunity," GM Lordstown's Site Utilities Manager, Chuck Simpson said, "Due to the SNAP wireless mesh networking operating system of yaham led streetlight market segment, we can wirelessly control our lights without installing a separate control system and adding additional servers. Further,yaham was already built into each light fixture so we only had to deal with one supplier, which was important in a project of this size."

The ALLink wireless integration has given the Stamping Plant the ability to customize and schedule specific light levels according to the tasks being performed in each work area. The Stamping Plant can increase light output in designated areas if needed or dim the fixtures in between breaks and shift changes. In addition, Lordstown added wireless light switches along the aisles for quick and easy manual control of the lights outside of the building management system.


"To our knowledge, this is the world's largest indoor LED installation with this type of built-in, fully integrated wireless control system" said David McAnally, President of yaham Lighting Systems. "nichia chip led high bay is clearly sending a signal to the world that it is going to be a leader in the industry in innovative, green energy solutions for its facilities.

you can read more:http://yahamlighting.blogspot.com/2013/10/the-technology-quickly-creates.html

LED backlight technology are designed specifically for healthcare applications

Edison received large orders from mainland China manufacturers, SO it intends to expand capacity with additional capital in the second half of this year, legal representative of Edison forecasts that the growth of Edison in the second half of this year is expected to be more than that in the first half of this year by 40%.The consolidated revenue of Edison in the first half of this year is 1.269 billion NTD, an annual increase of 3.25%, because it has expanded capacity with capital expenditures of 450 million NTD in the first half of this year, its legal representative predicates that the revenue in this year is expected to be 3.0 billion NTD.

Jianrong Wu, Chairman of Edison, confirmed that mainland China is actively transferring from traditional energy saving lamps to LED lights, and an energy-saving lamp needs 100-300 units of LED, while the annual output of energy-saving lamp in Mainland China is up to 100 million units, which is great demand, so Edison must prepare well.a global technology company designing and developing visualization products for a variety of selected professional markets, launched two new diagnostic display systems, which are the premium grayscale Coronis 3MP LED and the high-bright Nio Color 3MP LED. These diagnostic displays feature 3MP resolution and apply high-bright LED backlights, and can improve radiologist productivity and performance by making subtle details more noticeable and more quickly.


At a time when healthcare providers are being challenged to deliver care more efficiently, we are dedicated to helping them improve workflow efficiency," comments Lynda Domogalla, VP Product Marketing for Barco's Healthcare division. "Our new diagnostic display systems with LED backlight technology are designed specifically for healthcare applications and offer many clinical, operational and financial benefits."

services will be further extended with the launching of the flexible LED display

Advertising.my is a reputable agency that has been advocating the use of new technologies in this industry. As part of its new offerings, Advertising.my will be bringing High-Resolution and Flexible LED displays for the industry in light of its recent partnership deals. Advertising.my recently signed a partnership deal with Epistar of Taiwan, one of the leading global manufacturers of LED components which will launch P3 indoor LED displays in the country. With that, Advertising.my will now be able to provide affordable and cost-effective options for advertisers to better reach their respective target markets.

Epistar Taiwan has been involved in the manufacturing of LED components for more than 15 years. This partnership allow both firms to leverage on the strengths of products to better bridge their respective target groups.The repertoire of offerings will be further added with more partnerships in the pipeline with outdoor media owners where Advertising.my will be focusing more on billboard advertising and lamp post advertising. In using LED panels and message boards, Advertising.my will be able to bring more cutting-edge and target-market oriented choices to advertisers around the country. This will enable advertisers to better reach their target markets where LED digital advertising is known to be more effective as compared to static and conventional billboards.

The offerings of LED products and services will be further extended with the launching of the flexible LED display.This is where the LED panels are designed to be highly versatile that can attract a lot of attention in the outdoor environment as they come with the P10 specification which is intended for these purposes.Clients and advertisers can now enjoy more choices when using LED devices for advertising and campaigns. This is because Advertising.my will be offering LED display for rental services for better cost-effectiveness. Whether it is a roadshow, corporate parties, annual dinners or any other events which are organized for a short period of time, advertisers can now rent LED screens as part of their backdrops or for promotional purposes.


LED displays will surely liven up the atmosphere and create a suitable ambience as they are bright and clear, providing very impressive display options and very suitable for use as backdrops. Companies looking to use these displays for any event can now rent the panels through Advertising.my where they are available in varying shapes and sizes. Rental rates are affordable which includes installation and delivery to the event location. From there, Advertising.my will be involved in the maintenance and the operations of the LED panels for the duration of the entire event so that clients can enjoy the peace of mind when renting the devices.

the second quarter of strong growth in demand for LED products

The Biggest Thing Since the Light Bulb just only four months ago, now Cree announces the Cree LED BR30 Flood Light. The ground-breaking flood light leverages the same technical breakthroughs that made the led streetlight market segment bulb possible delivering consumers a flood light that looks like and lights like a traditional incandescent BR30 but uses 85% less energy and is designed to last 25 times longer than comparable incandescent flood lights.

According to the agreement, from the date of signing of the agreement for the coming year, the Shenzhen MTC will purchase total amount of RMB 500 million of LED chips from Anhui Sanan, this amount accounts for about 15% of Sanan sales revenue in 2012.An official from Sanan said that Shenzhen MTC is one of leading companies in domestic LED packaging industry and this partnership agreement marks Sanan has become the major supplier of LED chips for Shenzhen MTC. He also said that this year, LED market began to improve, especially in the second quarter of strong growth in demand for LED products.


The new Cree LED flood light comes with the same shape, same glass dome and same color light of the typical incandescent flood it replaces, and it blends seamlessly with existing 160w chip led high bay and gives consumers the flexibility to upgrade one or multiple bulbs without any noticeable difference, especially in recessed-lighting applications.In fact, the only difference they're likely to notice is lower utility bills. The new LED Flood Lights are backed by Cree's industry-leading, 10-year limited warranty and available exclusively at The Home Depot.

you can read more:http://yahamlightingled.blogspot.com/2013/10/the-application-of-led-in-some-special.html

Chinese children in poor areas for ten years

In order to benefit more poor families with children from the love donation of "light the light of hope", from September 5 to 7, Philips employees will go to Philips Hope Primary School in Jinping, Yunnan with volunteers to communicate with children face to face and personally sent them LED bulbs. In fact, as early as 2002, Philips invested 200,000 Yuan for the construction of school buildings, playgrounds and toilets; 2011, Philips donated lamps at the value of 123,000 Yuan for kids to create a bright and comfortable learning environment. The LED bulbs dominated are to improve home basic lighting and enhance the quality of family life for students; also it is the powerful evidence for that Philips has been relentless pursuit of "health, comfort and quality life".

Public interest is a sustained career, Philips has continuously assisted and supported the Chinese children in poor areas for ten years, and it started "Plan of Philips - one small step for happiness" in 2011, designed to attract more public power to participate in community activities.Philips will donate 1,366 versatile LED bulbs to the students from Hope Primary School in the name of consumers. Next, Philips will also donate LED bulbs to Philips Hope Primary Schools in other regions, so that it can bring light and hope for more children.


The 5630 package is the world's best performance in light output with 180 lm/W efficacy and is an extension of the mid-power LED lighting family that Seoul Semiconductor released as one of the first mid-power LEDs in the world for solid state lighting products. When it was released, the performance was better than existing high-power packaged LEDs. In the past 2 years, it became the best selling item among Seoul's product portfolio. The new 3030 LED being introduced extends the Seoul mid-power offering up to the high-power one watt range by enhancing both the LED chip and package in terms of heat resistance. Even though traditional 3030 packaged LEDs were mid-power, the new versions can be used in high power applications with the additional benefit of reducing costs by up to 50%.

ip65 with ip 30 nichia 150w chip led high bay

The new lights saved a lot of money for the company

UMsolar will be entirely self-reliant throughout the World Solar Challenge and will camp in the Australian Outback during the four race days. UMsolar is regarded as the most successful solar car team in North America, having won the North American Solar Challenge seven times and is currently the defending four-time champion. The team has also placed third in the World Solar Challenge (WSC) five times. No North American team has ever won the World Solar Challenge.

The Fallston Volunteer Fire and Ambulance Company in Maryland sought new energy saving lighting throughout its facility that would brighten up dimly lit areas and produce even illumination throughout the grounds.

We expect these lights to save us time in our evening operations in the Outback including vehicle maintenance in the pitch black of night. Nomad flood lights will be used to light our tents for vehicle maintenance. Command headlamps will allow team members to work anywhere with plenty of light.UMsolar successfully performed a mock race that covered parts of Michigan, Indiana and Ohio in late July.


This installation was after another fire station project I worked on, so I recommended yaham products because of how well they turned out. Fallston's board of directors was extremely pleased with the results. They didn't expect there to be a significant change, but the trial and installation produced even better lighting than before in the parking lot. The new lights saved a lot of money for the company.

helping us get a big step closer to our sustainability commitment

We trialed the first installation of the new LED lighting in one of our local convenience stores in Scotland late last year and the initial findings were so positive that we decided to install it in our new Leek supermarket,” said Paul Crewe,Led flood light head of sustainability. “We are confident that it will deliver an enhanced shopping experience as well as significant energy savings, helping us get a big step closer to our sustainability commitment.”

“Good office lighting design doesn't call attention to itself but to the environment,” said Bob Karlicek, director of the Smart Lighting Engineering Research Center that is funded primarily by the National Science Foundation (NSF) and headquartered at Rensselaer Polytechnic Institute (RPI), a private research university in Troy, N.Y., where GE's Lumination EP Series LED Luminaires were installed early this year at the behest of a department head fed up with dark and dingy fluorescent fixtures.

Karlicek recalled, “Our challenge was to install a state-of-the-art LED lighting solution to demonstrate what solid-state lighting can do and how it benefits occupants. We had a spot in mind in the Jonsson Engineering Center on RPI's campus. Replacing single T8 pendant-style fluorescent fixtures with GE's suspended LED lighting fixtures, we improved light quality and no longer have to replace old bulbs twice a year.


It's interesting because now people say, 'It got bright in here!' then ask, 'Is that new carpet?' and 'Did you paint?' or, 'Has that table always been there?' when of course we've done none of those things and the table was right there all along. Lumination EP Series Led high bay lighting will be in conference rooms at the institute as well. Karlicek noted the lighting fixtures, which are surrounded by a clear, narrow band that makes the light source appear to float, produce enough indirect (side) light to pleasantly illuminate walls without glare.

you can read more: http://winonds8.blogspot.com/2013/10/invigorating-otherwise-uninspired-areas.html

the number of LEDs used in backlighting will remain the same making the new device lighter

With information pouring in about the launch of new iPhone and iPad products this September, the whole world is watching to see if Apple will be able to perform as well as they did 3Q. It is rumored that the new iPhone will come with dual-LED flash which will increase the phone’s flash power. With the iPad mini, the new generation will use a 0.6t double die packaging but the number of LEDs used in backlighting will remain the same making the new device lighter and thinner.

The high sales of the first generation iPad mini lead to much anticipation for the next generation which is expected to be launched this September. This time, instead of using 0.8t single die packing, Apple opted to use 0.6t double die packaging. Both the older and newer models of the iPad use a total of 36 LEDs for backlighting. The new generation iPad is illuminated by a single LED light bar for backlighting much like the older version, but is expected to be a bit slimmer in design. There is a lot of anticipation over the new iPad mini with Retina display, but it is not expected to hit shelves until early next year. In the meantime, Apple will release the new iPad mini featuring a high-resolution screen this autumn.

As to whether or not iPad5 products will also be launched alongside the iPad mini in September is still being debated. The difference between the new generation iPad backlight module and the older generation is quite substantial. In terms of the number of LEDs needed in the backlight, the reduction of numbers in the new iPad brought the cost of the entire backlight module down. iPad 4 uses two LED light bars for backlighting and single die packaging, while the new generation iPad will only use one light bar but have double die packaging. The new iPad mini will use a total of 72 LEDs, giving it a slimmer design.

the number of LEDs used in backlighting will remain the same making the new device lighter

With information pouring in about the launch of new iPhone and iPad products this September, the whole world is watching to see if Apple will be able to perform as well as they did 3Q. It is rumored that the new iPhone will come with dual-LED flash which will increase the phone’s flash power. With the iPad mini, the new generation will use a 0.6t double die packaging but the number of LEDs used in backlighting will remain the same making the new device lighter and thinner.

The high sales of the first generation iPad mini lead to much anticipation for the next generation which is expected to be launched this September. This time, instead of using 0.8t single die packing, Apple opted to use 0.6t double die packaging. Both the older and newer models of the iPad use a total of 36 LEDs for backlighting. The new generation iPad is illuminated by a single LED light bar for backlighting much like the older version, but is expected to be a bit slimmer in design. There is a lot of anticipation over the new iPad mini with Retina display, but it is not expected to hit shelves until early next year. In the meantime, Apple will release the new iPad mini featuring a high-resolution screen this autumn.

As to whether or not iPad5 products will also be launched alongside the iPad mini in September is still being debated. The difference between the new generation iPad backlight module and the older generation is quite substantial. In terms of the number of LEDs needed in the backlight, the reduction of numbers in the new iPad brought the cost of the entire backlight module down. iPad 4 uses two LED light bars for backlighting and single die packaging, while the new generation iPad will only use one light bar but have double die packaging. The new iPad mini will use a total of 72 LEDs, giving it a slimmer design.

the number of LEDs used in backlighting will remain the same making the new device lighter

With information pouring in about the launch of new iPhone and iPad products this September, the whole world is watching to see if Apple will be able to perform as well as they did 3Q. It is rumored that the new iPhone will come with dual-LED flash which will increase the phone’s flash power. With the iPad mini, the new generation will use a 0.6t double die packaging but the number of LEDs used in backlighting will remain the same making the new device lighter and thinner.

The high sales of the first generation iPad mini lead to much anticipation for the next generation which is expected to be launched this September. This time, instead of using 0.8t single die packing, Apple opted to use 0.6t double die packaging. Both the older and newer models of the iPad use a total of 36 LEDs for backlighting. The new generation iPad is illuminated by a single LED light bar for backlighting much like the older version, but is expected to be a bit slimmer in design. There is a lot of anticipation over the new iPad mini with Retina display, but it is not expected to hit shelves until early next year. In the meantime, Apple will release the new iPad mini featuring a high-resolution screen this autumn.

As to whether or not iPad5 products will also be launched alongside the iPad mini in September is still being debated. The difference between the new generation iPad backlight module and the older generation is quite substantial. In terms of the number of LEDs needed in the backlight, the reduction of numbers in the new iPad brought the cost of the entire backlight module down. iPad 4 uses two LED light bars for backlighting and single die packaging, while the new generation iPad will only use one light bar but have double die packaging. The new iPad mini will use a total of 72 LEDs, giving it a slimmer design.

the number of LEDs used in backlighting will remain the same making the new device lighter

With information pouring in about the launch of new iPhone and iPad products this September, the whole world is watching to see if Apple will be able to perform as well as they did 3Q. It is rumored that the new iPhone will come with dual-LED flash which will increase the phone’s flash power. With the iPad mini, the new generation will use a 0.6t double die packaging but the number of LEDs used in backlighting will remain the same making the new device lighter and thinner.

The high sales of the first generation iPad mini lead to much anticipation for the next generation which is expected to be launched this September. This time, instead of using 0.8t single die packing, Apple opted to use 0.6t double die packaging. Both the older and newer models of the iPad use a total of 36 LEDs for backlighting. The new generation iPad is illuminated by a single LED light bar for backlighting much like the older version, but is expected to be a bit slimmer in design. There is a lot of anticipation over the new iPad mini with Retina display, but it is not expected to hit shelves until early next year. In the meantime, Apple will release the new iPad mini featuring a high-resolution screen this autumn.

As to whether or not iPad5 products will also be launched alongside the iPad mini in September is still being debated. The difference between the new generation iPad backlight module and the older generation is quite substantial. In terms of the number of LEDs needed in the backlight, the reduction of numbers in the new iPad brought the cost of the entire backlight module down. iPad 4 uses two LED light bars for backlighting and single die packaging, while the new generation iPad will only use one light bar but have double die packaging. The new iPad mini will use a total of 72 LEDs, giving it a slimmer design.

the number of LEDs used in backlighting will remain the same making the new device lighter

With information pouring in about the launch of new iPhone and iPad products this September, the whole world is watching to see if Apple will be able to perform as well as they did 3Q. It is rumored that the new iPhone will come with dual-LED flash which will increase the phone’s flash power. With the iPad mini, the new generation will use a 0.6t double die packaging but the number of LEDs used in backlighting will remain the same making the new device lighter and thinner.

The high sales of the first generation iPad mini lead to much anticipation for the next generation which is expected to be launched this September. This time, instead of using 0.8t single die packing, Apple opted to use 0.6t double die packaging. Both the older and newer models of the iPad use a total of 36 LEDs for backlighting. The new generation iPad is illuminated by a single LED light bar for backlighting much like the older version, but is expected to be a bit slimmer in design. There is a lot of anticipation over the new iPad mini with Retina display, but it is not expected to hit shelves until early next year. In the meantime, Apple will release the new iPad mini featuring a high-resolution screen this autumn.

As to whether or not iPad5 products will also be launched alongside the iPad mini in September is still being debated. The difference between the new generation iPad backlight module and the older generation is quite substantial. In terms of the number of LEDs needed in the backlight, the reduction of numbers in the new iPad brought the cost of the entire backlight module down. iPad 4 uses two LED light bars for backlighting and single die packaging, while the new generation iPad will only use one light bar but have double die packaging. The new iPad mini will use a total of 72 LEDs, giving it a slimmer design.

the number of LEDs used in backlighting will remain the same making the new device lighter

With information pouring in about the launch of new iPhone and iPad products this September, the whole world is watching to see if Apple will be able to perform as well as they did 3Q. It is rumored that the new iPhone will come with dual-LED flash which will increase the phone’s flash power. With the iPad mini, the new generation will use a 0.6t double die packaging but the number of LEDs used in backlighting will remain the same making the new device lighter and thinner.

The high sales of the first generation iPad mini lead to much anticipation for the next generation which is expected to be launched this September. This time, instead of using 0.8t single die packing, Apple opted to use 0.6t double die packaging. Both the older and newer models of the iPad use a total of 36 LEDs for backlighting. The new generation iPad is illuminated by a single LED light bar for backlighting much like the older version, but is expected to be a bit slimmer in design. There is a lot of anticipation over the new iPad mini with Retina display, but it is not expected to hit shelves until early next year. In the meantime, Apple will release the new iPad mini featuring a high-resolution screen this autumn.

As to whether or not iPad5 products will also be launched alongside the iPad mini in September is still being debated. The difference between the new generation iPad backlight module and the older generation is quite substantial. In terms of the number of LEDs needed in the backlight, the reduction of numbers in the new iPad brought the cost of the entire backlight module down. iPad 4 uses two LED light bars for backlighting and single die packaging, while the new generation iPad will only use one light bar but have double die packaging. The new iPad mini will use a total of 72 LEDs, giving it a slimmer design.

the number of LEDs used in backlighting will remain the same making the new device lighter

With information pouring in about the launch of new iPhone and iPad products this September, the whole world is watching to see if Apple will be able to perform as well as they did 3Q. It is rumored that the new iPhone will come with dual-LED flash which will increase the phone’s flash power. With the iPad mini, the new generation will use a 0.6t double die packaging but the number of LEDs used in backlighting will remain the same making the new device lighter and thinner.

The high sales of the first generation iPad mini lead to much anticipation for the next generation which is expected to be launched this September. This time, instead of using 0.8t single die packing, Apple opted to use 0.6t double die packaging. Both the older and newer models of the iPad use a total of 36 LEDs for backlighting. The new generation iPad is illuminated by a single LED light bar for backlighting much like the older version, but is expected to be a bit slimmer in design. There is a lot of anticipation over the new iPad mini with Retina display, but it is not expected to hit shelves until early next year. In the meantime, Apple will release the new iPad mini featuring a high-resolution screen this autumn.

As to whether or not iPad5 products will also be launched alongside the iPad mini in September is still being debated. The difference between the new generation iPad backlight module and the older generation is quite substantial. In terms of the number of LEDs needed in the backlight, the reduction of numbers in the new iPad brought the cost of the entire backlight module down. iPad 4 uses two LED light bars for backlighting and single die packaging, while the new generation iPad will only use one light bar but have double die packaging. The new iPad mini will use a total of 72 LEDs, giving it a slimmer design.

restructured into an incorporated company in 2011

HC SemiTek said that operating income in the first half of 2013 dropped 40.42% Y-o-Y, after the last year's irrational price competition in LED chip market, the price of LED chip has fallen dramatically. Affected by this, the sales volume of chip is more than that in same period last year, but sales revenue and gross profit decline. In response to fierce market competition, the company has made some adjustments in product specifications in the first half of this year, objectively resulted in a decline in sales of some products. Meanwhile, it has invested larger commissioning research and development costs for 4-inch production lines of its new subsidiary in Suzhou. The subsidiary increases recruitment scale and management expenses. In view of the above main reasons, the company's operating profit, total profits, and the net profit attributable to ordinary shareholders for the first half of 2013 suffer decrease.

The community of Serenbe is built around sustainability: everything from the home's methods of construction to the organic produce on the tables breathes sustainability. This philosophy encouraged Luis Imery, founder of The Imery Group (www.imerygroup.com) and designer/builder of Proud Green Home, to make Serenbe the home of their net zero project. They partnered with LG Squared Inc., a residential designer, to provide creative support in building the ideal home. A number of LG products were selected to help achieve net zero efficiency.


HC SemiTek Corporation, formerly Wuhan HC SemiTek Co., Ltd., was founded in 2005 and restructured into an incorporated company in 2011. HC SemiTek is a leading LED chip supplier based in Wuhan, China. As a high-tech enterprise in the field of "New materials, and New energy", we are committed to R&D, production and sales of the high-quality LED chips, mainly in GaN-based blue and green light series. The worldwide leading R&D capabilities enable us to make continuous innovation based on customer demand. Currently, we serve clients throughout the country, and the product has been successfully applied to a number of domestic key projects.

a broad range of precision component packaging products including embossed carrier tapes

A global leader in delivering advanced carrier tape solutions, has completed the move of its Shanghai operations to a larger new facility. The newly expanded factory is double the size of the old plant, and built in response to growing global demand for precision high quality carrier tape from the semiconductor, electronic, and LED industries. It is located just two kilometers from the old plant within the Waigaoqiao Free Trade Zone business park.

This new state of the art facility will manufacture Advantek’s complete line of carrier tape in polystyrene (PS) and polycarbonate (PC) materials. Also installed are new advanced systems capable of supporting the industry’s new high precision requirements for small devices and bare die.

Combining this latest China investment with factories in Taiwan and the Philippines, Advantek has greatly enhanced its capacity and flexibility to support our customer’s ever changing needs for the latest in carrier tape solutions. In addition to this strong base of manufacturing sites, Advantek provides direct customers support through network of global sales teams, regional distribution centers, and local customer application teams.


Advantek offers a broad range of precision component packaging products including embossed carrier tapes, anti-static cover tapes, shipping reels, static shielding / moisture barrier bags, desiccants, and humidity indicator cards. For 35 years Advantek has been delivering innovative carrier tape solutions to the world’s leading semiconductor and electronics manufacturers. Advantek began shipping carrier tape in the 1980’s.

you can link to yahamlighting,thank you very much.

another sign of an American manufacturing renewal

General Electric (GE) announced plans to invest US$ 30 million and add more than 150 jobs in U.S., expanding capacity of GE Lighting’s domestic manufacturing operations to meet growing consumer demand for led flood light energy-efficient soft white incandescent light bulbs. The announcement coincides with a new agreement between Walmart and GE, as part of Walmart’s US$ 50 billion domestic manufacturing commitment to bring more American-made products to consumers. This agreement will put U.S.-made GE energy-efficient soft white incandescent light bulbs on the shelves of 3,400 Walmart Stores by summer 2014.
Recruitment and hiring for the new manufacturing positions will occur over the coming months at three GE plants in Bucyrus and Circleville, Ohio, and Mattoon, Illinois. These new positions add to the more than 700 employees currently at work across the three plants.
“As a company whose history dates back more than 130 years, we understand that to grow, we have to invest—in R&D and in workers,” said GE Chairman and CEO Jeff Immelt. “Today’s announcement is evidence of our continued commitment to creating advanced manufacturing jobs in the U.S. and yet another sign of an American manufacturing renewal.”
GE and Walmart have a history of collaborative innovation. Working with GE, Walmart helped to pioneer the development, testing and use of LED systems in the retail setting. Walmart helped GE to conceive and perfect the application of LEDs in refrigerated display cases. Walmart store parking lots in the U.S. and abroad were among the first in the industry to switch to LED.

Since 2009, GE Lighting has invested more than a billion dollars to reshape the business, focusing on energy-efficient products and increasing led high bay light spending by 20%. GE has moved quickly to respond to increasing consumer demand for incandescent bulb alternatives, expanding existing manufacturing capabilities, while also working with Walmart to put domestically made bulbs into the hands of their consumers. Production of the domestically made bulbs will start the first half of 2014.

you can read more:http://winonds7.blogspot.com/2013/10/the-high-efficiency-of-every-fitting.html

I believe that the combination of our cutting edge technology

With over 33 years of mass production experience and core competencies in plastics injection molding and aluminum die casting; the marriage of such, with forward thinking LED technology and engineering, has produced the first and only full line of Isolated Phosphor Technology (IPT™) based LED direct replacement light bulbs manufactured by Matrix Lighting sold and distributed under the brand Viribright Benchmark by VBL.
Tripp Smith assumed the role of the new Vice President of Sales for the retail channels and brings with him a real depth of expertise and passion experience for the lamp business. With extensive sales and executive leader experience, Smith and the entire VBL sales teams have over 100+ years of lighting sales experience and are poised to strengthen VBLs placement in the North American market.
“I’m very excited about joining the Viribright sales team.” Smith said. “I believe that the combination of our cutting edge technology, combined with our brand, assortment, shapes, sizes and color temperatures put us in a position to win in the LED Light Bulb market in North America.”

“We are excited to have Tripp enter into a leadership role within our sales team” – said Jim Hardaway SVP of VBL. “We look forward to expanding our existing market share and seeing even more energy efficient Viribright LED light bulbs on retail shelves in the near future.“ “These are exciting times and we have the intention to remain a significant player in the transformation to energy efficient LED lighting in our markets.”

news data feeds continuously updated throughout the day

Wireless Ronin Technologies, Inc. has deployed a custom-designed, 60-foot-wide LED display along with its channel partner, Thomson Reuters, in the lobby of a major retail financial institution in Midtown Manhattan.Rather than the typical mono-color, right-to-left tickertape, Wireless Ronin designed and developed a one-of-a-kind digital signage solution for the highly trafficked location of the national financial institution. The display features a full color, multi-directional presentation that includes stock prices and company logos for the top 40 NASDAQ and NYSE stocks as well as top news stories and branded promotional content from the financial institution. The content is led high bay light integrated with Thomson Reuters Knowledge Direct data solutions, with market and news data feeds continuously updated throughout the day.
"This financial service retailer sought a digital solution to differentiate them from their competition and engage both existing clients in the branch as well as prospective customers walking by," commented Scott Koller, Wireless Ronin's president and CEO. "This custom solution demonstrates our Content Engineering team's creative abilities to design a solution that delivers on our customers' objectives. Based on the positive feedback from this initial deployment, this customer plans to install the ticker solution in additional locations, including a San Francisco branch next month.

On the evening of the 22nd of August, the led flood light ccepted the resignations of CEO Harald Sommerer and CFO Mathias Dähn effective 30 September 2013. This step had been preceded in recent months by intensive discussions on the future strategic direction of the Zumtobel Group. During these discussions it emerged that the two board members and the Supervisory Board held different views on the operational implementation of the global growth strategy during the important phase of the technology shift to LEDs. The Supervisory Board thanked the two board members for their efforts on the company’s behalf.

you can read more：http://winonds8.blogspot.com/2013/10/the-user-to-pinpoint-their-energy.html

Wuhan government actively encourages the use of innovative concepts

The company hopes to advance the promotion in broadening the usage of high efficiency lighting solution through the co-operative resource business model. Vice Mayor of Wuhan Municipal People's government Xing Zaozhong, Director of East Lake High-tech Zone Administrative led high bay light, and Philips Greater China President Liang Hanfeng were all in attendance at the founding ceremony. During the ceremony, the East Lake High-tech Zone Administrative Committee and Philips signed a strategic cooperation agreement which will promote energy saving and emission reduction and sustainable development for Wuhan and surrounding areas.
It is also the frontline to transformation and development for the Wuhan city circle,” expressed deputy mayor Xing Zaozhong. Philips ESCO (Wuhan) has now officially opened its doors to becoming a driving force for Wuhan City's East Lake High-tech Zone's environmental protection industry development. The Wuhan city government and East Lake High-tech Zone Administrative Committee plans to contribute ample supporting services towards the company so as to construct an even more superior environment for development.

Wuhan government actively encourages the use of innovative concepts and technology in order to create a “resource saving, environmentally friendly “oriented society. Therefore Philips’ sustainable development strategic contract is a welcomed addition.” President Liang Hanfeng said, “Important parts of Philips "grass root market strategy" is basing operations in China and delving deep into mid and western parts of the country. The establishment of the company in Wuhan symbolizes that we are making solid progress in implementing strategy in mid and western regions. At the same time, Philips and Wuhan East Lake High-tech Zone together have formed a strategic partnership leading to the creation an 180W led flood lights business model that helps to promote the expansion in usage of high energy efficient lighting in Wuhan and surrounding area, advancing towards the promotion of sustainable development in mid and western parts of the country.”

the new subsidiary are to strengthen the LED industry

The joint investment between San’an Optoelectronics and Yankon Lighting was announced on September 9th. The two companies will establish a development company for new illuminant and lighting R&D. Total investment in the company is RMB$30 million (US$ 5 million), 40 percent contributed by San’an at RMB$12 million (US$2 million).

The joint venture between the two companies make use of the combined technology and market superiority to create a market pipe line for development of new LED illuminant and lighting products. Price/performance ratio requirements during market based operation will place priority on application and sales for products produced by the joint venture company. The registered capital for the joint venture was paid in full. According to the developmental needs in the undertaking of the joint venture, both sides agreed to invest heavily so as to increase registered capital.


San’an expressed that the developmental goals of the new subsidiary are to strengthen the LED industry, advance in consolidating domestic LED superiority, expand cooperation, speed up internationalization, increase LED production line layout, and improve supporting measures. The advantages of this joint venture are in expansion of company cooperation and increasing LED production line layout.

more efficiently than any other grow light

The K3 series LED grow lights are comprised of high powered 3 Watt LEDs featuring a proprietary intensified spectrum designed for flowering large yields. This revolutionary series of led flood light will produce the biggest and best yields, while consuming approximately half the electricity and producing virtually no heat. The Kind LED Grow Light will cultivate record breaking yields, both in quantity and quality, while running quieter, cooler, and more efficiently than any other grow light.

In addition, after countless hours of research KIND LED developed their exclusive proprietary “Perfect Spectrum” that enables growers to harvest record yields at the highest quality level by utilizing a 12 spectrum bandwidth that penetrates the plant canopy entirely. A 2 cm thick high quality aluminum heat sink completes the hardware package design. Kind LED lights will match or outperform any other 3 watt LED grow light.


Only KIND LED grow lights are specifically designed to grow up to 150 different medicinal herbs and almost all vegetables. Comparaed to HPS lights, Kind LED grow lights use only about half as much electricity, and produce more yield per watt. Many studies have even shown an increase in oil production and quality, closer inter-nodal spacing, and denser fruits and flowers. Also, these Kind led high bay light grow lights produce less heat, and do not need to be air-cooled like HPS lights. Therefore, eliminating the need for additional fans and operates more quietly.

you can read more:http://winonds8.blogspot.com/2013/10/the-adhesive-is-ideal-for-small-die.html

The council also aims to improve safety

The Melbourne City Council in Australia has proposed a scheme to upgrade its public lighting over a period of 10 years, according to the article 'Melbourne plans public lighting upgrade' by LED high bay lighting.llumination of landmarks and landscapes is hoped to enhance the city’s skyline and promote Melbourne as a 24-hour city. The council also aims to improve safety, “so that places that are attractive by day will remain safe, comfortable and engaging after dark,” states the plan.

The strategy aims to improve the quality of its current lighting, but also to increase the energy efficiency of public lighting. The plan will cost an estimated AU$ 20 million, but could save the council almost $2 million per year. It is thought that it could also reduce greenhouse gas emissions by up to 8,000 tonnes annually. The plan states that “a vibrant and event-filled city is enhanced by innovative, well-considered lighting.”


Lights 4 Living, who supply high quality outdoor and led flood light in the UK, are supportive of Melbourne’s plans. A representative for the company said:Effective lighting can make a huge difference, whether it’s to your home or to a city skyline! It’s great to see Melbourne opting for energy-efficient lighting, which is both a way to save money and to help protect the environment LED lights are becoming increasingly popular in homes because of their ability to illuminate effectively whilst also being long lasting and energy efficient.”

you can read more:led high bay light

LED price ratio continues to increase

The advancement in LED wafer and packaging technology and continual decrease in price is the driver for the upcoming lighting era. Philip SSL Fellow George Craford pointed out that LED packaging component prices have been dropping following the increase in energy efficiency.Luminosity for cool white and warm white lights in 2013 have reached led high bay light. Philip’s goal for 2020 is for cool and warm lights to both reach a luminosity of 266lm/W. It is predicted that by 2020, the company will reach their 2000lm/dollar target.

LED price ratio continues to increase. According to resources provided by in regards to cool white light, there will be 250 lumens to every US$1 in 2013. Warm white lights will be about 196 lumens to 1m/dollar. It is estimated that by 2020 cool white lights and warm white lights will both reach 1428lm/dollar. Philip’s target for 2020 is 2000lm/dollar.LED technology progression and price have become the driving force behind the lighting market.The current luminosity for packaging components for 2013 has already reached 164lm/W and 129lm/W for cool and warm white lights.


Aside from having a secure standing in the global high-powered market and mid-powered product line, Mr. Craford also brought up during SEMICON that Philips excells in mid-powered packaging. Philips mid power LED package method has evolved from using PLCC packaging with PPA lead frames to using QFN package methods with PCT lead frames. QFN package methods that use EMC and SMC lead frames have also been on the rise in recent years. led flood light believes that using EMC and SMC lead frames will evolve towards ceramic flip chip packaging methods.heat dissipation performance, and increase electrical currents, efficiency, and production performance efficiency. Mid-power LED light source product technology continual improvements open up lighting and backlighting applied market.

you can read more:http://yahamlightingled.blogspot.com/2013/10/schmidt-has-used-led-washes-before-at.html

the United States Bankruptcy Court for the Southern District of New York

The Honorable Allan Gropper, Bankruptcy Judge of the United States Bankruptcy Court for the Southern District of New York, has ordered Eastman Kodak Company to assign ownership of three patents and a patent license agreement to Global OLED Technology, LLC, a company that is an owner and licensor of over 2,400 OLED patents and patent applications. This effectively ends the lawsuit that GOT filed against Kodak in December 2012.

Pursuant to Bankruptcy Rule 9019 of the Bankruptcy Code, the Court approved a settlement between GOT and Kodak which transfers ownership of United States Patent Nos. 6,717,560, 6,892,014 and 6,999,138 to GOT. Pursuant to the Court’s Order, GOT will be assigned Kodak’s September 1995 OLED patent license agreement with Pioneer Electronic Corporation, including all rights to receive royalty payments from Pioneer under the license.


“We are extremely pleased with the outcome of the lawsuit. This reinforces our commitment to aggressively defend GOT’s rights and assets in the OLED area,” said Daniel Carlineo, Esq., President and CEO of GOT. “In the past two years, GOT has taken the right steps to become an influential player in the OLED industry.”

The decrease in price in LED lighting is expected to continue

To welcome the LED lighting era, Taiwan LED chip manufacturer Formosa Epitaxy (ForEpi) Project Manager Li Renzhi stated that as the LED industry develops into an M shaped trend, highly priced but small volume products have occupied one end of the spectrum and products with large volume but pricing considerations are on the other. Continuing reduction in price for LED chips has lead to manufacturers entering into package free wafer R&D. ForEpi’s launched their Package Free Chips and through high efficiency, large luminosity angles, and more plan to break into the LED market.

The decrease in price in LED lighting is expected to continue. Aside from advancing towards a goal in higher luminosity, superiority in cost is also an important direction LED chips plan to go in. led flood light like Epistar, ForEpi, TSMC, Toshiba, Philips Lumileds, Cree and more are all progressing into package free chip development. Omitting packaging can reduce the total cost for LED components. Mr. Li states that following the increase from 600 lumens in bulbs to 800-1000 lumens, LED chip efficiency rate is no longer a big problem. Cost however still is.